|
|
|
| Communication Products |
| Serial Products |
|
|
MDM-TEL Industrial Modem
The MDM-TEL industrial serial modem has the features to meet your application requirements in a straight-forward manner. You won’t need to concoct a way to make it work. The MDM-TEL uses an industrial version of the standard PC modem chip set, so it supports the full set of AT commands and features. The MDM-TEL complies with telephone systems around the world. Whether you have domestic or international customers, the MDM-TEL can go where your equipment goes. Required to use a specific PLC? No problem. The MDM-TEL is compatible with most brands. And with the MDM-TEL, you can avoid repeating the design and qualification process. Our modems have a five-year guaranteed availability.
Part Number: MDM-TEL
- |
|
|
|
FA-ISOCON Universal Isolated Network Adapter
The FA-ISOCON Universal Isolated Network Adapter is used to place RS-232 devices such as PLCs, operator interfaces, industrial computers, etc., on an RS-422 or RS-485 multidrop network. The Network Adapter converts RS-232 signal levels to isolated RS-422 or RS-485 signal levels. This network adapter is similar to our other RS-232/422 converters, but it offers the added benefit of network isolation. This adapter is especially useful in noisy environments where data corruption due to induced noise is possible.
Part Number: FA-ISOCON
- |
|
|
|
F2-UNICON Universal Converter
The F2-UNICON Universal Converter converts RS-232 signal levels to RS-422 signal levels or RS-422 signal levels into RS-232 signals. The F2-UNICON does not offer the benefit of network isolation that the FA-ISOCON offers. The F2-UNICON has been specifically designed to be used with the DL05 and D2-240 CPUs. It offers features such as:
• Easily mounts to DIN rail
• Does not require an external power source. It obtains power from the +5V pin
on the D2-240 CPU port (bottom port) and the DL05 (port 2).
• Has transmit and receive LEDs to simplify troubleshooting.
Part Number: F2-UNICON
- |
|
|
|
FA-CABKIT Universal Cable Kit
The Universal Cable Kit (FA-CABKIT) allows you to connect various types of DirectLOGIC™ products with an RS-232 cable in a matter of minutes. The kit consists of a phone cable (with male plugs already attached) and several specially wired connectors. The special connectors are a D-sub style with built-in female phone jacks. This kit, with its wide variety of special connectors, allows for easy connections to many different products from each of the DirectLOGIC product families. The individual pieces are not sold separately.
Part Number: FA-CABKIT
- |
|
|
|
USB to RS-232 Converter
This quality USB to RS-232 converter transparently connects serial devices to PC applications via a USB port. It is perfect for the user needing to connect to a serial port-based peripheral from a laptop PC with an available USB port but no serial port. The adapter driver creates a virtual serial port (using the next available COM number). Applications connect to the virtual COM port as if it were a standard serial port. The USB-serial conversion is completely transparent to the peripheral device.
Part Number: USB-RS232
- |
|
| Ethernet Products |
|
|
Please visit our Industrial Ethernet Switches selection |
|
| Wireless Products |
|
|
CR-HN Series Serial Radio Modems
AUTOMATIONDIRECT’s CR series serial radios are versatile, low cost, 2.4 GHz frequency-hopping spread spectrum wireless data modems. The CR-HN radios are ideal for SCADA applications as remote modems in multipoint configurations and are an extremely costeffective solution for point-to-point installations.
|
|
|
|
CR-SE Series Ethernet Radio Modems
AUTOMATIONDIRECT’s CR-SE series Ethernet radios are based on the same patented Cirronet radio technology as the CR-HN serial radios. These are low cost, 2.4 GHz frequency-hopping spread spectrum wireless data modems. They provide long range, high-speed wireless connectivity among Ethernet devices in industrial settings. The CR-SE radios have exceptional multipath fade rejection as well as immunity to jamming. Typical CR-SE applications include wireless industrial automation and data collection, network bridging, PLC networking and SCADA. CR-SE radios can function as a high speed bridge to a distant Ethernet network node or a CR-SE radio base station can be connected to multiple remote CR-SE radios to build a wireless Ethernet network. The higher gain antennas increase the range up to 5-plus miles. All CR-SE models enable long range connectivity far beyond cabled Ethernet maximums.
|
| |
|
