 If you’re considering managed switches for your application, then most likely your network requires flexibility and features around high-performance, network management, enhanced cybersecurity efforts and network redundancy. Is cybersecurity becoming an increasing concern? As the number of connected devices on the plant floor grows, so does access to the data from those devices. Without the proper secure network devices in place, increases in access to your data can increase your network vulnerability to cyber-threats. The EDS-500E series switches support Moxa’s “Security View”*, which can help you to audit the security settings level of your Moxa switch, and can help you to easily correct misconfigured security settings based on the desired security level. Therefore, the level of cybersecurity implemented in a network is a valid concern. The best way to meet the requirements of your cybersecurity initiative is by selecting managed switches with security features based on IEC-62443 standards made specifically for industrial control systems. How significant are downtime costs? Maintaining high availability is a priority in industrial networks, so preventing every single point of failure is key. Network failures can lead to quality issues, a decrease in production, and possible safety hazards. This is where network redundancy plays a critical role. Traditional redundancy technology can take seconds to recover from a fault; this can impact the recovery of critical segments of your production floor. Moxa offers two different options to help with seamless recovery for mission-critical applications. Moxa’s Turbo Ring technology allows networks to recover within 20ms* with up to 250 nodes. For applications that already have a redundant ring technology, but need to add segments with recovery times in the milliseconds, Moxa’s Turbo Chain offers unlimited redundant network expansion with under 20ms recovery times. Both of these technologies take only seconds to set up and deliver seamless recovery with zero data loss. The EDS-500E series switches can also have their configuration files backed up and saved for fast and easy restoration in the event of misconfiguration or catastrophic events*. *Note: 10G/1G Ethernet recovery time < 50 ms Is your network slowing down? To help future proof your investment in a managed switch, it is important to consider the amount of throughput you will need to access the data from your devices. Not just for today, but also for any future high bandwidth devices like cameras for vision systems. Gigabit uplink ports offer you the bandwidth and high throughput necessary to ensure you have the performance to meet the demands of your growing network needs. Having visibility into your network is key in being able to keep your mission critical networks running smoothly. The EDS-500E series of fully managed switches support many network visualization features: Topology View (network topology), Traffic View (network traffic stats & traffic visualization), & Security View (security auditing & security settings visualization). *These features are supported by the specific Moxa devices and may require MXview and a valid MXview license to fully take advantage of these features. Request a free trial version of MXview below. Contact us or your local Moxa partner for exact pricing and additional information on MXview. Managed Switches
All-Around IP69K/IP68 Waterproof Edge Intelligence Gateway with both M.2 3052/3042 key B, M.2 2230 key E, GPS support, TPM 2.0
Thermal Edge Inc. | 4 Thermal Management Solutions to Consider in Industrial Electrical Design9/28/2021
SDS-3008/3016 Series |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
|
Curious about how to simplify the implementation of IoT in factory applications?
Advantech's UNO-238 IoT Edge Computer provides a flexible solution to accelerate IoT deployment:
- Swappable RAM for flexible configuration and integration
- Threaded DC jack for reliable power supply
 | UNO-238Compact IoT Edge Computer with Intel® Core™ i Processor, 2 x GbE, 4 x USB 3.2, 2 x RS-232/422/485, 1 x HDMI, 1 x DP, 1 x GPIO
|
 Images Courtesy of AutomationDirect.com | We’re excited to announce the addition of our new ProSense PLS series rotary paddle level switches to our already extensive line of process control solutions. These level switches are used as point level switches for dry, granular bulk solids, and are ideal for detecting full, empty, refill, or point level status in silos, hoppers, and bins containing bulk solids. Examples of products that can be sensed by rotary paddle level switches include cereals, sugar, animal feeds, washing powders, chalk dry plaster, dry cement, granulates, wood chips, and similar products. These level switches are available in three different shaft lengths, plus a rope version that can be shortened in the field based on the application. |
 Images Courtesy of AutomationDirect.com | AutomationDirect has added T-Slotted hardware components by FATH. Because the structures are lightweight, economical and easy to construct, slotted aluminum rail structures are commonly seen throughout many industries. From stands that hold barcode scanners and label applicator machines to OEM machines made entirely of T-slotted aluminum rail, this structure system is very popular. We have a wide variety of assembly hardware for T-slotted aluminum rail systems in various widths from 1 inch to 1.5 inch and 30mm to 45mm, which include T-nuts, fasteners, connecting components, joining plates and brackets, as well as floor, door and panel elements. These components are compatible with many brands. These FATH T-slot hardware products are all stock items, so they can be shipped quickly and have a 2-year warranty. |
 Images Courtesy of AutomationDirect.com | IDEM hazardous area safety devices provide similar functionality to their general-purpose counterparts but offer explosion-proof switching for use in hazardous locations. All of these devices are manufactured with ATEX Exd IIC T6 certified explosion-proof contact blocks which are encapsulated to contain explosions and prevent ignition of hazardous materials. New IDEM explosion-proof safety devices include tongue interlock safety switches, safety limit switches and safety cable-pull switches. These devices are an excellent choice for use in the oil, chemical, pharmaceutical and other hazardous industries. AutomationDirect has also extended its existing line of general-purpose safety cable-pull switches. This new line extension allows for emergency cable lengths of up to 250 meters. IDEM safety devices have a 1-year warranty. |
 Images Courtesy of AutomationDirect.com | AutomationDirect announces the addition of new temperature probes, sensors and thermowells to our existing portfolio of ProSense sensors. We have added 4 different types of probe designs and 3 sensor designs to meet the needs of unique applications. These new probes include heat trace probes; flange mount probes; cuttable probes; and melt bolt probes. The new temperature sensor designs being offered include; threaded bolt style; spade sensors; and magnet mount sensors. All of these probes and sensors are offered in type J thermocouple sensing elements. Type K thermocouple elements and PT100 RTD with class A accuracy are also offered with select series. A new line of thermowells have been added that are used specifically for sanitary Clean-in-Place applications and probes that have a tri-clamp process connection. These new ProSense temperature sensing products are proudly made in the USA and have an eighteen-month warranty. |
 | | ||
| Datasheet |
 Images Courtesy of AutomationDirect.com | New hazardous location alarm buzzers have been added to the lineup of control and indicating devices. The STAHL YA11 series signal alarms sound an audible warning, alert, or information in the event of equipment malfunctions, safety issues, or when systems are starting up. These alarms provide an omni-directional audible signal, are intended for use in hazardous areas or the harshest environments, and have hazardous area certifications for international use. Available in alternating two-tone, alternating fast tone and continuous tone models, with a maximum volume of 100dB at 1 meter and an aluminum/ABS plastic housing, these buzzers are NEMA 4X, IP66 rated, prewired for easy installation, and can be panel or surface mounted. |
 Images Courtesy of AutomationDirect.com | GEFRAN magnetostrictive linear position transducers work just like other linear position sensors, by translating a linear position to an electrical signal. However, they are contactless which provides a longer life because there is no mechanical wear; since they use magnetostrictive technology ,they are also immune to electromagnetic interferences. Transducers are available in stroke lengths from 50 to 500mm, and with an analog output signal of either 0-10VDC or 4-20mA for single output models. Double output models provide either a 0-10VDC and reverse 10-0VDC signal, or a 4-20mA with a 20-4mA reverse signal. The electrical connection is made via a standard DIN connector or M12 connection and all units are IP67 rated. Cursors are sold separately. Gefran magnetostrictive linear position transducers from AutomationDirect have a 3-year warranty. |
 Images Courtesy of AutomationDirect.com | A new series of Contrinex M18 photoelectric sensors and a sensor tester expand our selection of discrete sensors. The Contrinex M18 sensors have a short body for easy installation in even the tightest locations. These sensors are available in diffuse with adjustable background suppression, diffuse, retroreflective and through-beam models, and with NPN and PNP logic. The outputs are complementary, allowing them to be used as a light-on or dark-on sensor. Connection options include a 2 meter, 4-wire PVC cable or a 4-pin M12 quick-disconnect. An AutomationDirect sensor tester can test any DC-powered sensor of any brand for proper functionality. This tool can save time before installation or while troubleshooting. The new Contrinex photoelectric sensors and the sensor tester have a two-year warranty. Sensors testers can be found under all discrete sensor categories' Accessories page. |
 Images Courtesy of AutomationDirect.com | WON linear bearing guides and rails generate lower friction than comparable sliding bearings. With less friction to overcome, less power is required to move a load, higher speeds can be achieved and greater efficiency is reached. WON linear bearing guides and rails are available in various sizes to meet the needs of any specialized motion project. The H series offers four rows of continuously circulating ball bearings and comes in a flanged or rectangular form factor; the compact M and MB series offer two rows and come in either a rectangular or long rectangular form factor. Rail in lengths up to 1000mm match the series of guides that are selected. All guide/rail systems provide 4-direction equal load sharing in any direction for lower friction and smooth motion. WON linear bearing guides and rails have a 1-year warranty. |
 Images Courtesy of AutomationDirect.com | PS-AMC motion controllers are designed to work seamlessly with select Productivity PLCs to provide accurate, coordinated, plug-and-play motion control. These controllers are capable of up to 4 coordinated axes of motion per controller (PS-AMC4) with differential encoder feedback for each axis and a maximum switching frequency of 1MHz. Up to 24 general purpose high-speed inputs and 12 general purpose high-speed outputs are also included. Available in 1, 2, 3, or 4 axes models, AMC controllers are auto-discovered in the Productivity Suite programming software which has numerous built-in motion instructions allowing for easy configuration of standard motion profiles including flying cut offs and rotary tables. |
 | Save time and money when using Ignition with edge devices like PLCs, flow computers, meters, and RTUs. Fanless PCs with Ignition Edge Onboard™ are a fast, easy, and scalable way to connect these edge devices and make them accessible to your Ignition Gateway server, or to use that data in an Ignition-powered HMI. These rugged little PCs are easy to deploy and come with Ignition Edge™ already installed and licensed. Even better - you’ll save on the retail cost of Ignition Edge™. |
Now more than ever, industrial users want to take advantage of modern and powerful software for their remote operations and assets. The challenge has been finding practical, cost-effective, and easy-to-deploy solutions which can support a wide range of PLCs, RTUs, meters, flow computers, and other devices at the industrial edge for remote monitoring and data acquisition applications.
Moxa + Ignition™
| One of the easiest and most cost-effective ways to get data from remote equipment is to use an industrial fanless PC with Ignition™. Moxa’s rugged and proven fanless PCs are already heavily used for edge computing applications and unmanned operation in thousands of outdoor and industrial sites. With Ignition Edge Onboard™ these units are a powerful platform for PLC data collection within a modern MQTT or Ignition™ architecture. Together, you have a highly flexible solution to collect and share data from remote devices in any location, regardless of manufacturer or vendor. |  |
Featured Models
V2201 Series
Intel® Atom® E3800 DIN-rail computer with 2 mini PCIe expansion slots for wireless |
MC-1100 Series
Intel® Atom® E3800 DIN-rail computer with hazardous environment and DNV GL certifications |
MC-1200 Series
Ultra-compact rugged edge computers with Intel® Core™ i7 processor, designed for IIoT, AI, and machine learning applications |
 Images Courtesy of AutomationDirect.com | The Productivity1000 remote I/O module provides a low-cost remote I/O solution for both the P1-550 and P2-550 controllers. Up to 4 P1-RX remote modules can be used with the P1-550 and up to 8 can be used with the P2-550. That adds an additional 512 I/O points to the P1000 system, which did not offer remote expansion before, and an additional 1024 for the P2000 at a much lower cost than the existing P2-RS expansion module. All P1-RX modules and connected I/O are auto-discovered in the Productivity Suite programming software with pre-assigned tags for each I/O point that can be used right away in the ladder code or modified as needed. |
| The EKI-1511 series are industrial grade, entry-level serial-to-Ethernet device servers that support widely adopted RS-232/422/485 serial modes for serial-to-Ethernet protocol conversion. Their compact size and affordability are suitable for limited space applications, and projects requiring partial serial device digitalization. | |
 Images Courtesy of AutomationDirect.com | New Ironhorse NEMA 4X AC drives expand our offering of precise motor control in industrial environments. The ACN series can control 230VAC 3-phase motors up to 20 hp when powered with 230VAC 3-phase, and up to 10 hp when powered with 230VAC single-phase. The 460VAC models support motor sizes up to 30 hp when powered with 460VAC 3-phase, and up to 15 hp when powered by 460VAC single-phase. These drives include ample built-in I/O and support Modbus RTU. Additional I/O is supported with option cards; Ethernet communications allows the drive to be controlled and monitored over Modbus TCP or EtherNet/IP. VFD Suite is a free, user-friendly software package that configures these drives, programs the sequence controller and includes other advanced features, such as trending. These new drives have an 18-month warranty. |
 Images Courtesy of AutomationDirect.com | New Quabbin data cables are designed with impedances specifically for RS-232, RS-422, and RS-485 communication applications in industrial environments. These high-quality, low-capacitance data cables have tinned copper conductors with twisted pairs that help reduce electrical noise sensitivity and are available in one-, two-, three-, or four-pair color-coded versions. The polyethylene conductor insulation provides a very high insulation resistance with a low, stable dielectric constant that results in lower capacitance and excellent propagation velocity for superior signal transmission. Order Quabbin data cables cut to your specified lengths in 1-foot increments with a 25-ft. minimum, starting at $0.22 per foot. |