Quantum Automation
  • Home
  • About Us
  • Blog
  • Terms
  • Industries
  • Contact
  • Shop
  • Home
  • About Us
  • Blog
  • Terms
  • Industries
  • Contact
  • Shop

MOXA | MGate MB3170i – From Modbus/TCP, ASCII, or RTU to Modbus/TCP, ASCII, or RTU

3/13/2023

Comments

 
Picture
MGate MB3170i – From Modbus/TCP, ASCII, or RTU to Modbus/TCP, ASCII, or RTU
MGate 5105-MB-EIP – From Modbus/TCP, ASCII, or RTU to EtherNet/IP
MGate 5102 – From Modbus (any) or EtherNet/IP to PROFINET
We have a special going on right now for the most popular model, the MGate MB3170i
​
Quantum Automation has over 500 units in stock!
Datalogging and Trending of Analyzed Data at a SCADA or IIoT Centralized Location can help determine potential issues to minimize downtime but can also provide information to increase productivity and provide a safer environment.
BUY NOW
1 and 2-port advanced serial-to-Ethernet Modbus gateways
​Features and Benefits
• Supports Auto Device Routing for easy configuration
• Supports route by TCP port or IP address for flexible deployment
• Connects up to 32 Modbus TCP servers
• Connects up to 31 or 62 Modbus RTU/ASCII slaves
• Accessed by up to 32 Modbus TCP clients (retains 32 Modbus requests for
each Master)
• Supports Modbus serial master to Modbus serial slave communications
• Built-in Ethernet cascading for easy wiring
• 10/100BaseTX (RJ45) or 100BaseFX (single mode or multi-mode with SC/ST
connector)
• Emergency request tunnels ensure QoS control
• Embedded Modbus traffic monitoring for easy troubleshooting
• Serial port with 2 kV isolation protection (for “-I” models)
• -40 to 75°C wide operating temperature models available
• Supports redundant dual DC power inputs and 1 relay output
DATASHEET
File Size: 1481 kb
File Type: pdf
Download File

Comments

Moxa | AWK-1151C Series

2/27/2023

Comments

 
Industrial IEEE 802.11a/b/g/n/ac wireless client
Picture
Features and Benefits
  •  IEEE 802.11a/b/g/n/ac Wave 2 wireless client
  •  Selectable dual-band Wi-Fi with data rates up to 867 Mbps
  •  Latest WPA3 encryption for enhanced wireless network security
  •  Universal (UN) models with configurable country or region code for more flexible deployment
  •  Easy network setup with Network Address Translation (NAT)
  •  Millisecond-level Client-based Turbo Roaming 
  •  Built-in 2.4 GHz and 5 GHz band pass filter for more reliable wireless connections
  •  -40 to 75°C wide operating temperature range (-T models)
  •  Integrated antenna isolation
Datasheet
File Size: 839 kb
File Type: pdf
Download File

Comments

Moxa | AWK-4252A Series

2/27/2023

Comments

 
Outdoor industrial IEEE 802.11a/b/g/n/ac wireless AP/bridge/client
Picture
Features and Benefits
  •  IEEE 802.11a/b/g/n/ac Wave 2 AP/bridge/client
  •  Concurrent dual-band Wi-Fi with aggregated data rates up to 1.267 Gbps
  •  Latest WPA3 encryption for enhanced wireless network security
  •  Universal (UN) models with configurable country or region code for more flexible deployment
  •  Easy network setup with Network Address Translation (NAT)
  •  Millisecond-level Client-based Turbo Roaming 
  •  Built-in 2.4 GHz and 5 GHz band pass filter for more reliable wireless connections
  •  IP68-rated weatherproof housing designed for outdoor applications and -40 to 75°C wide operating temperature range
  •  Integrated antenna isolation
Datasheet
File Size: 1008 kb
File Type: pdf
Download File

Comments

Moxa | AWK-3252A Series

2/27/2023

Comments

 
Picture
Industrial IEEE 802.11a/b/g/n/ac wireless AP/bridge/client​Features and Benefits
  •  IEEE 802.11a/b/g/n/ac Wave 2 AP/bridge/client
  •  Concurrent dual-band Wi-Fi with aggregated data rates up to 1.267 Gbps
  •  Latest WPA3 encryption for enhanced wireless network security
  •  Universal (UN) models with configurable country or region code for more flexible deployment
  •  Easy network setup with Network Address Translation (NAT)
  •  Millisecond-level Client-based Turbo Roaming 
  •  Built-in 2.4 GHz and 5 GHz band pass filter for more reliable wireless connections
  •  -40 to 75°C wide operating temperature range (-T models)
  •  Integrated antenna isolation
Datasheet
File Size: 972 kb
File Type: pdf
Download File

Comments

Moxa | EDS-G2000-EL/ELP Series

2/10/2023

Comments

 
Picture

​Industrial Gigabit Unmanaged Ethernet Switches
  • 5 or 8 Ethernet port options
  • Full Gigabit ports for the EDS-G2000-EL/ELP Series
  • Supports 12/24/48 VDC input
  • Microsecond-level latency
  • High EMC resistance
  • QoS and BSP*** DIP switch configuration
  • -40 to 75°C wide operating temperature range (-T models)

Download Datasheets
  • Metal housing options:
    EDS-G2005-EL Series   |   EDS-G2008-EL Series  
  • Plastic housing options:
    EDS-G2005-ELP Series   |   EDS-G2008-ELP Series
See our in-stock Ethernet Switches
Comments

MOXA | EDR-G9010 Series

10/28/2022

Comments

 
Picture
Picture

​EDR-G9010 Series

8 GbE copper + 2 GbE SFP multiport industrial secure router

Features and Benefits
  •  10-port Gigabit all-in-one firewall/NAT/VPN/router/switch
  •  Industrial-grade Intrusion Prevention/Detection System (IPS/IDS)
  •  Visualize OT security with the MXsecurity management software
  •  Secure remote access tunnel with VPN
  •  Examine industrial protocol data with Deep Packet Inspection (DPI) technology
  •  Easy network setup with Network Address Translation (NAT)
  •  RSTP/Turbo Ring redundant protocol enhances network redundancy
  •  Security features based on IEC 62443/NERC CIP
  •  Supports secure boot for checking system integrity
  •  -40 to 75°C operating temperature range (-T model)
Datasheet
File Size: 1669 kb
File Type: pdf
Download File

Comments

Moxa | Securely Connect Older Modbus, DNP3, and Other Devices

7/25/2022

Comments

 
Picture

Use protocol gateways without compromising security

Picture
When you use a protocol gateway to connect to older Modbus, Profibus, DNP3, or other devices, you need to be careful about exposing those devices to cybersecurity risks. That’s why we design our MGate 3000 and 5000 line of protocol gateways to be in full compliance with IEC 62443-2 security standards, and offer additional tools and resources to protect against unauthorized users.

Protect Against Unauthorized Access

Picture
User Authentication and Authorization
A common security vulnerability in industrial systems are devices that are still using the default manufacturer’s login and password. Our firmware requires administrators to change this password during configuration.
Picture
Security Hardening Guide
​
Our step-by-step security hardening guide helps you configure the MGate to minimize exposure to cybersecurity threats. You’ll see exactly which services are unnecessary and can be disabled for your use case.
Picture
Communication Integrity
​
Configuration access is protected through the support of secure protocols TLS 1.2, HTTPS, and SNMPv3. Insecure protocols (e.g., HTTP) are disabled by default.
Picture
Network Access Control
​
Additional functions such as IP address allowlist help you further limit network access so unauthorized users cannot make changes to device settings.

Tools to Monitor and Take Action

Picture
Security Advisories and Patches

​You can subscribe to our Security Advisory page to make sure you are notified of any new vulnerabilities that have been discovered. We will provide mitigation guidance as well as links to download security patches and updated firmware as needed.
Picture
Visibility for Network Administrators

Our MXview network management suite provides easy visibility of your network topology and supported network devices. You’ll be able to see your MGate’s security status and set up user-defined notifications and alarms, so you can respond before an unauthorized user is able to wreak havoc.
Picture
Device Management

Our MXconfig utility and CLI configuration tools are powerful tools when you need to manage multiple MGate units and other supported network devices. In a few steps, you can back up or restore settings on each device, or update each device’s firmware to take advantage of any security patches.
Check out our featured products
Comments

Moxa | Defend Your Industrial Networks

6/29/2022

Comments

 
Picture

Achieving Network Security for Industrial Automation

In order to optimize operational efficiency for modern industrial automation systems, network convergence between OT and IT is imperative. While streamlining your OT/IT networks unlocks the potential of your industrial systems, it also raises network security concerns. It is a particular concern for those OT systems that used to be air gapped but must still protect network communications without interrupting operations. As a leader in industrial networking for over 30 years, Moxa is committed to developing secure and reliable networking solutions that proactively identify and mitigate cyberthreats in OT environments. To realize this commitment, Moxa strictly follows secure-by-design practices, utilizes distributed OT intrusion prevention systems capabilities, and provides a wide array of rugged networking portfolios to perfect defending industrial applications in depth.
Picture

Visualize Your Device and Network Security Status

Visibility empowers you to secure your industrial control systems. Moxa’s complete product portfolio, including network management software, allows you to centrally manage your networking devices with real-time visibility. The portfolio secures remote assets, which simplifies remote maintenance via cloud services, and the security dashboard allows you to monitor and manage security events from our industrial cybersecurity solutions.
Picture
Picture
Picture
Picture
Picture
Picture

Network Segmentation

Establish Zones and Conduits
  • VLAN: Moxa’s devices help administrators restrict users access to only data and parts of the network necessary for them to perform their responsibilities.
  • Firewalls: Moxa’s devices help administrators establish conduits in the network to only allow permitted traffic and packets to transfer from one zone to another.
  • NAT: Moxa’s devices help administrators establish a private local zone to hide internal network information from external probing.
Network Security Control
  • VLAN ID or MAC Addresses: Moxa’s devices only allow users to access data and networks based on their roles.
  • IP Addresses and Ports: Moxa’s devices only allow permitted traffic on the network.
  • Deep Packet Inspection: Moxa’s devices check the content of each packet payload to ensure only approved content is transmitted on the networks.
Picture

Security-hardened Networking and Connectivity Solutions

The secure DNA of our products empowers you to run existing industrial systems easily. Moxa is an IEC 62443-4-1 certified industrial connectivity and networking solutions provider. When we develop our products, we reference the security features of the IEC 62443-4-2 standard to ensure secure product development, which allows you to ramp up device security in your industrial applications.
Picture
Picture

EDS-4008 Series

8-port Managed Ethernet Switches
Download Datasheet
Picture

EDS-G4008 Series

8-port Full Gigabit Managed Ethernet Switches
Download Datasheet
Picture
Learn More
  • Industrial Routers - EDR
  • Industrial Managed & Unmanaged Switches - EDS
  • Serial Device Servers - Nports
  • Media Converters - Mgates
  • IO - ioLogix
  • Fiber to Copper Converters
  • PoE - Injectors - INJ
  • Embedded Computers - UC-8112
  • RAM, SSD, SATA HD, MS-Windows
  • Industrial Computer Modification Center
Comments

Moxa | Ethernet Switches for Industrial Automation ​

6/6/2022

Comments

 
Picture
If you’ve been tasked with implementing new technologies on your plant floor to align with company initiatives, you'll have to determine which networking solutions are best for your application. With Moxa’s offering of Ethernet Switches, you’ll be able to find the right solution for your network.​
Picture

Unmanaged Switches

Best suited for easy deployment when networking resources are limited.
​

In-Stock Inventory
Picture

Smart Switches

Combines the ease of unmanaged switch deployment with some of the features of a managed switch.

In-Stock Inventory
Picture

Managed Switches

Packed with features to ensure cybersecurity, enable network visualization, and maintain high data speeds.
In-Stock Inventory
LEARN MORE
Picture
LEARN MORE
Picture
LEARN MORE
Comments

Moxa | Introducing the EDS-4000/G4000 Managed Switches That Strengthen Your Network Resilience

4/11/2022

Comments

 
Picture

​Introducing the EDS-4000/G4000 Managed Switches That Strengthen Your Network Resilience

The EDS-4000/G4000 Series industrial managed Ethernet switches unveils a new chapter of industrial networking. The strengthened security, easy-to-use design, and high performance coupled with high reliability strengthen your network resilience to help you face networking challenges. With this futureproof networking portfolio, you can effortlessly accelerate your digital transformation.


Networking Evolved
Moxa EDS-4000/G4000 Industrial Managed Switches
​

Picture

Comprehensive Portfolio: 68 Models

Picture
For ordering info, please contact us.
Comments

Moxa | Monitor your power systems smarter

1/28/2022

Comments

 
Picture
Picture

​Enabling Your Power Monitoring Applications

Power devices deployed nearby main power sources, such as switchgears, automated transfer switches (ATS), and uninterrupted power supply (UPS), require constant monitoring to ensure the power quality is at an acceptable level. This case study describes how Moxa’s solution enabled our client’s power quality monitoring applications in their data centers.
Learn more
Picture
Picture
Picture
Picture
Comments

Moxa | ioThinx 4510 Series

11/16/2021

Comments

 

Advanced modular remote I/O adapters with built-in serial ports

Picture
  •  Easy tool-free installation and removal
  •  Easy web configuration and reconfiguration
  •  Built-in Modbus RTU gateway function
  •  Supports Modbus/SNMP/RESTful API/MQTT
  •  Supports SNMPv3, SNMPv3 Trap, and SNMPv3 Inform with SHA-2 encryption
  •  Supports up to 32 I/O modules
  •  -40 to 75°C wide operating temperature model available
  •  Class I Division 2 and ATEX Zone 2 certifications
Datasheet
File Size: 4915 kb
File Type: pdf
Download File

Comments

Moxa | Power Application Architecture Guide

11/15/2021

Comments

 
Picture
oxa provides industry standards based communication and computing solutions that can easily manage distributed devices and seamlessly integrate them with SCADA systems and operator stations. Download this application guide to learn how to empower solar plants and substations with industrial communication and computing solutions using our recommended products.
Applications include:
  • Ground-mount Solar
  • Utility Substation
  • Critcial Power
  • Distributed Energy Resources
Download the Brochure
Comments

Moxa | Routers and Gateways: IT Level of Security, Purpose-Built for OT Networks

10/28/2021

Comments

 
Picture
For the past 30+ years, we have developed an extensive portfolio of products designed for the harsh operating requirements of OT networks. However, as network security threats continue to rise, we have combined our OT expertise with IT level security features within our leading product lines. This has resulted in a comprehensive OT security connectivity portfolio. See below to understand how we have incorporated expansive security features across our products to keep your networks not only connected, but secure . 
Picture

​Making Smart Manufacturing a Reality

Every network application is unique depending on environment, scale and budget. However, 
there can be similarities in design across all of these. Check out the following example that illustrates how our eco-system of connectivity solutions can transform a factory/plant into something that's Smart, Efficient and Secure. 
Picture
Download the PDF
File Size: 4839 kb
File Type: pdf
Download File

Comments

Moxa | Managed Switches

10/26/2021

Comments

 
Picture
If you’re considering managed switches for your application, then most likely your network requires flexibility and features around high-performance, network management, enhanced cybersecurity efforts and network redundancy.

Is cybersecurity becoming an increasing concern?

Picture
As the number of connected devices on the plant floor grows, so does access to the data from those devices. Without the proper secure network devices in place, increases in access to your data can increase your network vulnerability to cyber-threats. The EDS-500E series switches support Moxa’s “Security View”*, which can help you to audit the security settings level of your Moxa switch, and can help you to easily correct misconfigured security settings based on the desired security level. Therefore, the level of cybersecurity implemented in a network is a valid concern. The best way to meet the requirements of your cybersecurity initiative is by selecting managed switches with security features based on IEC-62443 standards made specifically for industrial control systems.


How significant are downtime costs?

Picture
Maintaining high availability is a priority in industrial networks, so preventing every single point of failure is key. Network failures can lead to quality issues, a decrease in production, and possible safety hazards. This is where network redundancy plays a critical role. Traditional redundancy technology can take seconds to recover from a fault; this can impact the recovery of critical segments of your production floor. Moxa offers two different options to help with seamless recovery for mission-critical applications. Moxa’s Turbo Ring technology allows networks to recover within 20ms* with up to 250 nodes. For applications that already have a redundant ring technology, but need to add segments with recovery times in the milliseconds, Moxa’s Turbo Chain offers unlimited redundant network expansion with under 20ms recovery times. Both of these technologies take only seconds to set up and deliver seamless recovery with zero data loss. The EDS-500E series switches can also have their configuration files backed up and saved for fast and easy restoration in the event of misconfiguration or catastrophic events*.
*Note: 10G/1G Ethernet recovery time < 50 ms


Is your network slowing down?

Picture
To help future proof your investment in a managed switch, it is important to consider the amount of throughput you will need to access the data from your devices. Not just for today, but also for any future high bandwidth devices like cameras for vision systems. Gigabit uplink ports offer you the bandwidth and high throughput necessary to ensure you have the performance to meet the demands of your growing network needs. Having visibility into your network is key in being able to keep your mission critical networks running smoothly. The EDS-500E series of fully managed switches support many network visualization features: Topology View (network topology), Traffic View (network traffic stats & traffic visualization), & Security View (security auditing & security settings visualization).
​
*These features are supported by the specific Moxa devices and may require MXview and a valid MXview license to fully take advantage of these features. Request a free trial version of MXview below. Contact us or your local Moxa partner for exact pricing and additional information on MXview.

Managed Switches

EDS-408A Series
Features and Benefits

  1. Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and RSTP/STP for network redundancy
  2. IGMP Snooping, QoS, IEEE 802.1Q VLAN, and port-based VLAN supported
  3. Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01
  4. PROFINET or EtherNet/IP enabled by default (PN or EIP models)
  5. Supports MXstudio for easy, visualized industrial network management

EDS-408A Series: 8x ports
Download Datasheet
Picture

EDS-510E Series
​
Features and Benefits

  1. 3x Gigabit Ethernet ports for redundant ring or uplink solutions
  2. Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), Gigabit Ethernet recovery time < 50 ms RSTP/STP, and MSTP for network redundancy
  3. RADIUS, TACACS+, SNMPv3, IEEE 802.1x, HTTPS, SSH, and sticky MAC address to enhance network security
  4. Security features based on IEC 62443
  5. Supports MXstudio for easy, visualized industrial network management
  6. V-ON™ ensures millisecond-level multicast data and video network recovery

EDS-510E Series: 7x Fast Ethernet + 3x Gigabit ports
Download Datasheet
Picture
Comments

Moxa | SDS Series

9/24/2021

Comments

 
Picture
Machine builders and automation engineers are expecting to find an easy way to monitor both control systems and network status from their SCADA/HMI, so that they can react in time to minimize the downtime of the entire system. In addition, the most common concern related to deploying managed switches is operational complexity, including both setup and subsequent management.
Moxa’s super-slim SDS-3000 Series industrial smart switches are designed to meet these challenges. With their simplified protocol configuration, flexible mounting design, easy-to-use interface, and slim form factor, the SDS-3000 Series industrial smart switches are the perfect fit for control cabinets in any smart manufacturing application.
Picture

SDS-3008/3016 Series
8/16-port Smart Switches

Picture
  • SDS-3016: 14+2G-port Gigabit Ethernet switches
    SDS-3008: 8-port Ethernet switches
  • Three industrial protocols supported including EtherNet/IP, PROFINET, and Modbus/TCP
  • Two installation methods with DIN-rail and rack-mounting options
  • One-page dashboard GUI for easy configuration and port diagnostics reports
  • One-step configuration to enable seamless SCADA/HMI/NMS integration
  • Ultra-compact design that fits into almost any control cabinet
  • Supports RSTP/STP/MRP (Client) network redundancy
  • Rotary DIP switch to perform profile-based settings (SDS-3016 only)
Comments

Moxa | Securing bandwidth-hungry industrial applications is important. Bolster your network defenses with high security, performance, and versatility.

8/26/2021

Comments

 
Picture
Picture

​
​Features and Benefits

  • All-in-one firewall/NAT/VPN/router/switch with 10 GbE ports
  •  Secure remote access tunnel with VPN
  •  Stateful firewall protects critical assets
  •  Inspect industrial protocols with PacketGuard technology
  •  Easy network setup with Network Address Translation (NAT)
  •  RSTP/Turbo Ring redundant protocol enhances network redundancy
  •  Security features based on IEC 62443/NERC CIP
  •  Supports secure boot for checking system integrity
  •  Check firewall settings with the intelligent SettingCheck feature
  •  -40 to 75°C operating temperature range (-T model)​
Datasheet
File Size: 1157 kb
File Type: pdf
Download File

Comments

Moxa | Fanless PCs with Ignition Edge Onboard™

8/16/2021

Comments

 
Picture
Save time and money when using Ignition with edge devices like PLCs, flow computers, meters, and RTUs. Fanless PCs with Ignition Edge Onboard™ are a fast, easy, and scalable way to connect these edge devices and make them accessible to your Ignition Gateway server, or to use that data in an Ignition-powered HMI. These rugged little PCs are easy to deploy and come with Ignition Edge™ already installed and licensed. Even better - you’ll save on the retail cost of Ignition Edge™.
Now more than ever, industrial users want to take advantage of modern and powerful software for their remote operations and assets. The challenge has been finding practical, cost-effective, and easy-to-deploy solutions which can support a wide range of PLCs, RTUs, meters, flow computers, and other devices at the industrial edge for remote monitoring and data acquisition applications.

Moxa + Ignition™

One of the easiest and most cost-effective ways to get data from remote equipment is to use an industrial fanless PC with Ignition™. Moxa’s rugged and proven fanless PCs are already heavily used for edge computing applications and unmanned operation in thousands of outdoor and industrial sites. With Ignition Edge Onboard™ these units are a powerful platform for PLC data collection within a modern MQTT or Ignition™ architecture. Together, you have a highly flexible solution to collect and share data from remote devices in any location, regardless of manufacturer or vendor.
Picture
Picture

Featured Models

V2201 Series Intel® Atom® E3800 DIN-rail computer with 2 mini PCIe expansion slots for wireless
V2201 Series
Intel® Atom® E3800 DIN-rail computer with 2 mini PCIe expansion slots for wireless
Picture
MC-1100 Series
Intel® Atom® E3800 DIN-rail computer with hazardous environment and DNV GL certifications
Picture
MC-1200 Series
Ultra-compact rugged edge computers with Intel® Core™ i7 processor, designed for IIoT, AI, and machine learning applications
Comments

Moxa | Smart Switch Application Note

7/27/2021

Comments

 
Picture
Moxa’s SDS-3000 Series industrial smart switches simplify daily tasks for industrial automation (IA) engineers with easy configuration and installation, interoperable communication, and ultimately, help reduce downtime. Download the application note, which includes six case studies, to find out more about how the smart switch’s excellent design and key features assist users in smart manufacturing environments.
Download
Comments

Moxa | EDR-G9010 Series

7/12/2021

Comments

 

​8 GbE copper + 2 GbE SFP multiport industrial secure router

Picture
Features and Benefits
  •  All-in-one firewall/NAT/VPN/router/switch with 10 GbE ports
  •  Secure remote access tunnel with VPN
  •  Stateful firewall protects critical assets
  •  Inspect industrial protocols with PacketGuard technology
  •  Easy network setup with Network Address Translation (NAT)
  •  RSTP/Turbo Ring redundant protocol enhances network redundancy
  •  Security features based on IEC 62443/NERC CIP
  •  Supports secure boot for checking system integrity
  •  Check firewall settings with the intelligent SettingCheck feature
  •  -40 to 75°C operating temperature range (-T model)
Download the Datasheet
Comments

Moxa | SDS-3008/3016 Series8/16-port Smart Switches

6/17/2021

Comments

 
Picture
Picture
SDS-3008/3016 Series
8/16-port Smart Switches
  • SDS-3016: 14+2G-port Gigabit Ethernet switches
    SDS-3008: 8-port Ethernet switches
  • Three industrial protocols supported including EtherNet/IP, PROFINET, and Modbus/TCP
  • Two installation methods with DIN-rail and rack-mounting options
  • One-page dashboard GUI for easy configuration and port diagnostics reports
  • One-step configuration to enable seamless SCADA/HMI/NMS integration
  • Ultra-compact design that fits into almost any control cabinet
  • Supports RSTP/STP/MRP (Client) network redundancy
  • Rotary DIP switch to perform profile-based settings (SDS-3016 only)
Comments

Moxa | Easily Connect to Older Equipment

5/24/2021

Comments

 
Picture
Picture
Do you have older operational equipment (in the field or on the floor) that has issues interfacing with modern devices and platforms? There are common challenges when trying to overcome the communication limitations of your old Modbus devices, Allen Bradley™ PLCs, Siemens™ drives, switchgear, or power monitoring equipment. In this 20-minute webinar, we highlight the most important things we’ve learned over our past 35 years of connecting thousands of legacy devices to modern systems.
  • NPort Selection Guide
  • ioLogik Selection Guide
  • MGate Selection Guide
Comments

Moxa | Managing Your OT Networks Remotely Without Introducing Intruders

4/13/2021

Comments

 
Picture
In February 2021, an unidentified intruder gained access to the network systems of a US water treatment plant in Oldsmar, Florida, and briefly altered the chemical levels in the drinking water. Fortunately, an employee noticed the intrusion attempt and blocked it immediately. This incident sparked many discussions on the topic of cybersecurity in operational technology (OT) environments within the media and the industrial sector. Read More
Comments

Moxa | Introduces Secure Hardened Modbus-to-BACnet Gateways for Your Critical Power Communications

2/24/2021

Comments

 
Picture
Taipei, Taiwan, January 04, 2021 — Moxa, a leading provider of industrial edge connectivity solutions, introduced a new series of secure hardened Modbus-to-BACnet protocol gateways. The MGate 5217 Series consists of industrial protocol gateways that support Modbus RTU/ASCII/TCP and BACnet/IP protocol conversions, making it easy to integrate industrial devices into an energy management system. The MGate 5217 protocol gateways’ design is based on the IEC 62443 standard to enhance connectivity security. In addition, the MGate 5217 protocol gateways feature a reliable design that ensures continuous operation under harsh condition and easy-to-use tools to make device configuration and troubleshooting easy.
Secure Hardened to Protect Critical Assets
Critical power communication takes place in applications such as data centers where vulnerabilities are unacceptable. Based on the IEC 62443 standard, the MGate 5217 protocol gateways’ design supports various security features, such as whitelisting, account management, password policy, and a TLS secure connection, that allow only authorized users and prevent unwanted access, enhancing connectivity security,
Reliable Design for Continuous Operation
Critical power communication cannot endure system downtime, thus reliable communication between power monitoring devices and SCADA systems is critical. Therefore, the MGate 5217 protocol gateways feature 2 kv serial port isolation and a -40 to 75°C wide operating temperature range to ensure reliable communications and operations. In addition, the MGate protocol gateways come with an industry-leading 5-year warranty, ensuring stability and reliability for long-term operations.
Effortless Installation and Maintenance
In power monitoring applications, devices such as power meters, automatic transfer switches (ATS), or UPS controllers are required to get connected and communicate with SCADA systems for instant power status monitoring. The installation and maintenance of numerous communication devices can be a daunting job. The MGate 5217 protocol gateways support an easy-to-use configuration tool and a built-in troubleshooting tool that make installation and maintenance easy and fast.

MGate 5217 Series
2-port Modbus RTU/ASCII/TCP-to-BACnet/IP gateways

Features and Benefits
  •  Supports Modbus RTU/ASCII/TCP master/client
  •  Supports BACnet/IP slave/server
  •  Supports 600 points and 1200 points models
  •  Supports COV for fast data communication
  •  Supports virtual nodes designed to make each Modbus device as a separate BACnet/IP device
  •  Configures Modbus commands quickly by editing an Excel spreadsheet
  •  Embedded traffic and diagnostic information for easy troubleshooting
  •  Built-in Ethernet cascading for easy wiring
  •  Industrial design with -40 to 75°C operating temperature range
  •  Serial port with 2 kV isolation protection
  •  Dual AC/DC power supply
  •  5-year warranty
  •  Security features based on IEC 62443
Download the Datasheet

Comments

Moxa | EDS-2000-EL Series

2/24/2021

Comments

 
Picture
Picture
EDS-2000-EL Series
​Industrial Unmanaged Ethernet Switches
  • 5 or 8 Ethernet port options
  • SC/ST fiber models are available for the EDS-2008 Series
  • Supports 12/24/48 VDC input
  • Microsecond-level latency
  • High EMC resistance
  • QoS and BSP*** DIP switch configuration
Download Datasheets
  • Metal housing options:
    EDS-2005-EL Series   |   EDS-2008-EL Series  
  • Plastic housing options:
    EDS-2005-ELP Series   |   EDS-2008-ELP Series
Comments
<<Previous

    Products:
    ​Advantech
    ​Ewon
    Moxa
    IDEC
    ​CC emailers
Orders & Support
714-854-0800 | 7am - 5pm PST
Sales@QuantumAutomation.com | ​www.QuantumAutomation.com
4400 East La Palma Avenue, ​Anaheim, CA 92807
​Copyright © Quantum Automation. All Rights Reserved.
Website Development RavingDesignz